How to press the black network wire

Normally, we often click with multi-colored network wires and have a total of 8 fibers and use the standard RJ45 to click. However, there are also strings that do not have enough 8 strands such as black network cable with only 4 wires then how to press the black network wire and keep the transmission in the best state.

If you have never pressed a black network wire with 4 fibers, the following guide will show you how to press the most standard black wire, ensuring the connection is like the 8 fiber type.

Instructions for pressing the black network wire

Preparation tools:

– RJ45 standard network wire pliers, popular type and cost about 80,000 VND.
– Specialized wire cutter, can use the blade of the pliers below instead.
– The most popular type of RJ45 network button today, you can buy it at any computer accessory store.
– Of course, the black 4 wire network cable.

Step 1: Proceed to use a knife, scissors or use pliers to cut off the cover of the network wire.
Note is to cut only the outer protective cover, not the sheath of the inner wires.

Step 2: Then pull the strands straight and equal in length and then insert it into the RJ45 lattice, note that if the threads are not equal, you can use scissors or pliers to cut them to make them equal.

Before proceeding to insert the wire into the RJ45 network beads, readers need to refer to the image of the black network wire guide below to know the best locations.

Step 3: After making sure about the holes inserted in the RJ45 network beads, we continue to fix the RJ45 beads and the black network wire.

Note that after the fixation does not work or your black wire is not correct, the only way is to cut the wire and make a new wire.

Step 4: Then you use the machine to check if the connection is identical or not, if the lights turn on at the same time, it means that the 4-strand black network wire has been successful.

In case you do not have a tool to check, you can plug both ends into any modem, if both are lit, the connection is smooth, otherwise you have to press again.

https://thuthuat.Emergenceingames.com/cach-bam-day-mang-mau-den-42236n.aspx
Above is a guide on how to press the black network wire for 4-fiber wires, this is also the most standard 4-wire network method to ensure a connection within 100 meters for each connection, in addition to 4 fiber network cable The standard is also a way to help you practice the best way to wire the network instead of just focusing on the current 8 fiber network cables.