Summary of common Teamviewer errors, how to fix Teamviewer errors

Sometimes in the process of using Teamview, users will face some errors and problems, here are some Teamviewer error Common problems and how to fix them.

How to fix common Teamviewer errors

Summary of common Teamviewer errors

1. TeamViewer error is limited to 5 minutes

TeamViewer login time limit error 5 minutes will usually be accompanied by a message that is Accessto the Teamviewer Server Has Been Deniedto fix the error that TeamViewer is limited to 5 minutes, please refer to the tutorial article How to fix Teamviewer error is limited to 5 minutes here.

2. Error not showing ID and Pass

The cause of the error not showing ID and PASS (Password) is because I am installing 2 different versions of Teamviewer on 2 computers that need to be connected, to fix this error, please refer to How to fix Teamviewer not showing ID and Pass error? here.

3. Error TeamViewer is not running on partner computer

The cause of the error “TeamViewer is not running on partner computer”, Teamview does not work on the computer to be connected.
– Due to using the free and expired TeamViewer version
– Because TeamViewer is limited to 5 minutes on the device that needs to be connected

How to fix:
– In case the free and expired version: you need to buy the license.
– Case 2: limited to 5 minutes, follow the instructions:
Step 1: Open the box Run (use the Windows keyboard shortcut + R on the keyboard)
Step 2: Type services.msc
Step 3: Find and choose TeamViewer => Click Restart

Finally, reopen TeamViewer and reconnect to see if it’s ok.

4. Error Unable to connect to the proxy server

The “Unable to connect to proxy server” error is also one of the common Teamview errors. The cause of the error may be network connection and proxy protocol error. To fix the error:

Step 1: Go to the Start menu, type msconfig there and then press Enter.
Step 2: On the window displayed on the screen, click Boot tab and enable Safe Mode, then reboot your system.
Step 3: After the computer has finished restarting, go to Control Panel, select Internet Propertiesselect Connections tab then click the button Settings.
Step 4: Uncheck your proxy server and click Apply.
Step 5: Go back to the Start menu and enter msconfig in the Search box, on the next window uncheck Safe Mode, restart your computer and try to reconnect Teamviewer to see if the error is still there or not.

5. Partner did not connect to router error

This error occurs when the computer on the other end does not have a network connection, but in some cases the error can occur even when the computer is already connected to the network. There are many causes of the error, it may be due to an installation error, incompatibility with the version of TeamViewer installed on 2 computers, … .

To handle the Teamviewer error: “Partner did not connect to router error” on a Windows computer, you can apply a few ways to fix the error below:

– Method 1: Restart the network
Both (ie you and the user on the other end) restart the router and check if the Teaviewer error still occurs or not.

– Method 2: Allow full access to Teamview
Open TeamViewer, then click Extras on the menu bar. Next, click Options and switch to the pane on the left, find and select Advanced.

In the right pane, find and click Show advanced options.

In section Advanced settings for connection to this computersection Access Control you choose Full Access from the menu.

Finally click on OK to save the changes and check if the Partner did not connect to router error still occurs.

– Method 3: Delete DNS configuration
The final solution to fix the Partner did not connect to router error is to clear the DNS configuration.

Open Command Prompt as Admin, then run the commands below one by one to clear the DNS cache:

ipconfig/release
ipconfig/renew
ipconfig/flushdns

Note: If you do not know how to open Command Prompt under Admin, readers can refer to the article running CMD with Administrator rights on Windows 7, 8, 8.1, 10 on Taimienphi.vn to know how to do it.

Once done, close the Command Prompt window and check if the TeamView error is still there.

6. Other TemViewer Errors

6.1. Teamviewer error black screen
This is not an error, but due to the installation status of the computer connected to the black wallpaper, see how to fix Teamviewer black screen error here

6.2. Error “This site is running TeamViewer…”
The error of not being able to access any website when using TeamViewer software is not too strange for many people.

6.3. Error can’t upgrade new version of TeamViewer
When you encounter this error, you will receive the message “Verification of your TeamViewer version failed”|, the solution is to completely remove TeamViewer in Regedit and reinstall it.

6.4. Error Accessto the Teamviewer Server Has Been Denied

6.5. Protocol Negotiation Failed error when connecting on TeamViewer

6.6. Error “Rollback framework could not be initialized” when installing Teamviewer

Above, Taimienphi.vn has just summarized common TeamViewer errors and how to fix them. In addition, if you have any questions or questions that need to be answered, readers can leave their comments in the comment section below the article.

By default, TeamViewe will automatically generate an ID and Pass for you each time you use it, you can change your Teamview password to improve the security of the software, How to change Teamviewer password specific instructions on Taimienphi.

TeamViewer is a popular remote computer connection and control software today, allowing users to connect 2 computers together from anywhere, and supports many different platforms. The following article Taimienphi.vn will summarize and introduce you to common Teamview errors and how to fix them.

https://thuthuat.taimienphi.vn/tong-hop-loi-teamviewer-thuong-gap-45834n.aspx
Or you can also set a fixed password for teamview so that you don’t have to worry and lose time each time you use it, How to set a fixed password teamviewer There are also details on taimienphi.