How to install wifi, TP-Link modem wifi transmitter, Tenda, Vnpt, Viettel

How to install wifi, TP-Link modem wifi transmitter, Tenda, Vnpt, Viettel … to help increase security for the best wifi, avoid your home wifi being hacked, leading to “overload” situation, from When you access the network, you often encounter a laggy, frozen network.

How to do this helps you: Easily set up wifi for each network

progress Internet connection, WIFI For laptops, mobile phones have become a habit and necessary for us in daily life and work. In particular, wifi transmitters are quite important when smart devices are widely used today. There will be times when you will encounter a situation where your internet connection is stalled, or you can’t even catch the wifi signal.

Install wifi modem tp-link, Tenda, Viettel …

Instead of before, when you bought a new one, the technicians installed wifi for you, now, when you encounter this case, how will you fix it. With how to set up wifi, install wifi router modem TP-Link, Tenda, Vnpt, Viettel The following will help you do just that. Not only can you change the password to protect and avoid the situation that your home’s wifi is used every day by the neighbors… but this way you also create conditions for the device to rest. after hours of operation.

How to install wifi, Install TP-Link modem wifi transmitter, Tenda, Vnpt, Viettel

1. Install wifi, Install TP-Link modem wifi transmitter.

Step 1: Determine the IP address of the wifi transmitter.

Usually, to perform this step, you just need to turn the back of the device up and you will see all the information that the manufacturer printed on it along with the IP address and password we need to access.

As you can see in the picture the IP address of the device is 192.168.1.1, the common default account and password is admin. In addition, with all TP Link devices, you can also replace the IP address range by accessing http://tplinklogin.net.

However, if you cannot find the IP address used to configure and change the wifi password as shown in the picture, you can apply the following method. check IP address on the computer to know the IP address on that device, you can apply this IP address check to many different devices.

In many cases, devices are configured and set up by technicians in a different IP range, so you will not be able to access the default IP address. So if you want to manually configure and set the wifi password, you have to reset the device back to its original state by using a toothpick to press and hold the reset button until all the indicator lights of the device turn on. light at the same time and then release the hand. Now wait for the device to automatically receive the IP address, then you can log in with the default account as above.

Step 2: Connect the wifi transmitter to the computer by LAN wire (Plug the network wire on the yellow LAN port). Use any web browser to access the IP address 192.168.1.1 or the link http://tplinklogin.net with username and password admin .

Step 3: The wifi transmitter management interface appears, in the left column you choose Network >LAN to change the IP address then press Save let the device change back to the default IP range (this step will help your device avoid having the same IP with the modem).

Step 4: Next in the left column, you choose next Wireless > Wireless Settings . Here you enter the new wifi name in the section Wireless Network Name then press Save as shown below.

Step 5: Finally, set up a password for the wifi router. Also at tab Wireless you choose Wireless Security .

In there Version and Encryption you should leave it on Automatic so that later devices catch the wifi most can receive. Item Wireless Password where you enter the password for the device. After you have set all the parameters, you press Save to save progress.

That’s it, after the setup process, install TP Link wifi, now you just need to connect the internet cable from the modem to the WAN port of the device and you can use wifi on other handheld devices already.

2. Install wifi, Install Tenda modem wifi transmitter.

Step 1: Similar to TP Link, after determining the IP range of the device, you proceed to access it through any web browser. Normally Tenda’s default address would be 192.168.0.1 with the password admin.

Step 2: Select DHCP Then enter the WiFi password you want to set in the box Security Key then press OK.

Step 3: Click select Advanced To enter the device customization settings, here you click on the tab Wireless > enter the new wifi name in the box SSID (Network Name) then press OK to save.

So you have installed Tenda wifi, now you unplug the cable that is plugged in on the computer and plug it into the port on the Modem, the other end you switch to plug in the blue WAN port on the wifi transmitter. With VNPT or Viettel wifi transmitters and a few other brands, you can also operate the simple steps as above. Only that each device they will configure different login user/pass such as VNPT with commonly used username/password is megavnn. For more details, you can follow the summary article wifi modem login account shared by Taimienphi in the previous post.

Above is the process to guide you how to install wifi with just a few simple steps on some popular brands today. Hopefully with this small trick will help you manage and track the number of people using your home wifi, avoiding the situation when crooks use to steal your Wifi network.

https://thuthuat.Emergenceingames.com/cach-cai-dat-wifi-cai-bo-phat-wifi-modem-tp-link-tenda-vnpt-viettel-22594n.aspx
In addition, you can also refer to a few more ways to change wifi passwords on other devices such as FPT, DLINK, iGATE… that we have summarized below. I wish you success in changing your home wifi password.

*How to change FTP wifi password
*How to change Tenda wifi password
*How to change wifi password LINKSYS
*How to change wifi password iGATE
*How to change wifi password DLINK
*How to change Viettel wifi password
*How to change Huawei VNPT wifi password
*How to change wifi password VNPT Yes Telecom