Errors can’t login 192.168.1.1

As mentioned above, there are many causes error can’t login 192.168.1.1, it could be because this is not the default gateway address on your router (router), the router is turned off or because the LAN or Wifi card is disabled, the firewall blocks your network connection,… . To fix the error of not being able to access 192.168.1.1, please continue reading the following article of Taimienphi.vn.

Instructions to fix the error of not being able to log in 192.168.1.1

Fix the error of not being able to login 192.168.1.1

Method 1: Check the default IP address

To fix the 192.168.1.1 failed to login error, the first solution is to check if 192.168.1.1 is the default IP address on your router.

Follow the steps below:

Step 1: Press Windows + CHEAP to open the Run window, then type cmd there and then press Enter.

Step 2: On the Command Prompt window, run the command below:

Command: ipconfig

Find item Default Gateway and see if the 192.168.1.1 address is set up as the default gateway address. If yes and login error 192.168.1.1 still occurs, please refer to some ways to fix the error below.

Method 2: Turn on your router

Find and press power button on the back of your router to turn off the router, wait for about 1 minute, then press again power button to reopen the router and check if the login error 192.168.1.1 is still there.

Method 3: Activate the network card

Step 1: Right-click the network icon located in the system tray, select Open Network and Sharing Center.

Step 2: On the window displayed on the screen, in the left pane you select Change adapter settings.

Step 3: Make sure the network card you are using is activated. If the network card is disabled you will see the option set to Disable. Right click on the network card you are using, select Enable to reactivate.

Method 4: Update network driver

Step 1: Press Windows + CHEAP to open the Run window, then type devmgmt.msc there and then press Enter to open the Device Manager window.

Step 2: On the Device Manager window, find and expand the item Network adapters.

Step 3: Right click on the network card driver you are using, select Update Driver Software….

Step 4: Select Search automatically for updated driver software.

Step 5: Wait until Windows finishes updating the network card driver.

Step 6: Follow the same steps to update another network card driver.

Finally try to check if 192.168.1.1 is logged in or not.

https://thuthuat.taimienphi.vn/cac-loi-khong-dang-nhap-duoc-192-168-1-1-58368n.aspx
The above article Taimienphi.vn has just shown you how to fix the error of not being able to log in 192.168.1.1. Hope the above article has provided you with useful information. If you use Totolink modem and have a login error, please refer to How to fix error of not being able to access 192.168.1.1 Totolink here. Good luck.