Configure FPT fiber optic Gpon modem parameters to access the internet

If you are using FPT’s fiber optic Gpon modem, you should configure the parameters according to this article to be able to access the Internet.

If in case you reset the modem, all settings will return to default. You will now have 2 options. One is to call FPT staff to fix it. The second is to follow the article on configuring the parameters of the FPT fiber optic Gpon modem to access the network below.

Configure FPT fiber optic Gpon modem parameters to access the internet

Step 1: First you connect the Gpon modem to the computer via the network wire. The top on the modem can be plugged in at any position 1, 2, 3, 4 (if there are 4 LAN ports).

Step 2: On the browser, access the address 192.168.1.1, then enter the following information.

User: admin

Pass: admin

Step 3: At this time, the setup page interface will appear. You switch to the WAN tab and enter the following parameters.

WAN IP Mode: PPPoE

Username: fpt (of the form hnfdl-123456-789)

Password: Has the form fd12345

Next click on the . button Save to save.

Thus, Emergenceingames.com introduced to you how to configure the parameters of FPT fiber optic Gpon modem to be able to access the Internet. Usually you only have to reconfigure when you reset the modem or when you buy a new one. If applying the above method is still unsuccessful, you should ask an experienced person or FPT support staff to help you. We also have articles wifi modem location help you find the best Wifi location.

User and Pass are important information that users need to have if they want to access FPT modem to change wifi password or configure admin. So what is the user, password to access the FPT modem? how to get? Read the article User and Pass to access FPT modemyou will quickly find your answer.

https://thuthuat.Emergenceingames.com/cau-hinh-cac-thong-so-cua-modem-gpon-cap-quang-fpt-4329n.aspx