Change iGate wifi password, change iGate VNPT wifi password

Changing the iGate wifi pass should be done regularly to limit “strangers” from using your home’s wifi, and at the same time increase the effective network speed. Just a few simple steps, you can change wifi password iGate VNPT easily.

This will help you:
– Have IP to access the network
– Have an account to access
– Easily change wifi password

Besides Huawei’s wifi, VNPT now also uses iGate modem. Usually, fiber optic packages deployed since 2015 all use iGate modems. Therefore, if you are looking for a way to change wifi pass iGate VNPT, change password, wireless name. Please refer to the steps below to know how to change wifi password iGate VNPT

How to change iGate VNPT wifi password to increase security and ensure transmission stability?

If the user wants to change the wifi password on the phone, please see the detailed article How to change wifi password by phone

Change iGate wifi password, change iGate VNPT wifi password

Before doing this, you should reset the modem so that you can log in with the default account and password. How to reset the modem as follows:
Take a small toothpick, poke the Reset hole on the side of the modem, hold it for about 15 seconds or when the indicator light on the modem goes off and then turns on again.

Step 1: First, open your browser and enter the address 192.168.1.1 in the address bar.

In the old version, users can use the default username/password admin/admin to log in and change the wifi password iGate VNPT. However, currently in iGate modem/router devices that are updated with new firmware, users after accessing the address 192.168.1.1 for the first time will have to update the new password to ensure user safety.

Here you enter the following information.

Username – Account name

Old Password – Old password

New Password – A new password

Confirm Password – Reconfirm new password

For the Username and Old Password sections, enter the old admin account information, in the New Password section, enter a new password that meets the following conditions.

– At least 1 lowercase character (az)

– At least 1 uppercase character (AZ)

– At least one digit (0-9)

Step 2: After changing the admin account password, you can use the new account to log in to the device.

Step 3: Next you move to Network Settings > Wireless > Basic > SSID to change the wireless name.

Step 4: Finally switch to Network Settings > Wireless > Security > WPA/WAPI passphrase to enter a new password and then press Apply/Save to save.

So we have just introduced to you how to change wifi pass iGate VNPT. Besides changing the password, we also guide you to change the wireless name. The interface of the iGate modem is a bit more difficult to use than other modems, so you should consider carefully when performing other operations. Because most likely you will not find that option to edit again. In addition, you can also refer to how change wifi password VNPT Yes Telecom. If interested, please drop by for reference.

https://thuthuat.Emergenceingames.com/doi-pass-wifi-igate-vnpt-4505n.aspx