Play wifi win 8, share wifi on Windows 8 without software

Using a laptop to create a Wifi hotspot, sharing the internet for other devices brings a lot of benefits when you don’t need expensive or difficult wifi routers, wifi routers. If in the previous article we showed you how to play Wifi on Win 7 and how to play wifi on Windows 10, in this article you will know how to play Wifi on Windows 8 without using support software.

The main content presented in the article

– How to play Wifi on Windows 8 without using software
– How to turn off Wifi on Windows 8.
– Remove 1 hosted created.
– Fix some errors that cannot play Wifi on Windows 8.

Instructions for playing Wifi on Windows 8 without software

Step 1: Press the key combination Windows + X then choose Command Prompt (Admin)

Step 2: In Command Prompt enter the following command line Enter:

netsh wlan set hostednetwork mode=allow ssid=NameWifi key=PassWifi

– In there:
+ NameWifi is the Wifi name you want, this name you can set as you like.
+ PassWifi is the password of Wifi, minimum 8 characters.

Step 3: After pressing Enter, the system will automatically set up a wifi network on Windows 8, then enter the following command line Command Prompt and Enter.

netsh wlan start hostednetwork

Step 4: You access Network and Sharing Center > Change update settings to open Internet sharing settings. Right click on the network you are using to connect to the Internet then select Properties.

Step 5: In the card Sharingtick in Allow other network users to connect…

At the same time in the card Home networking connectionselect the profile name just created, is Local Area Connection* 13 press OK To confirm.

How to turn off Wifi

To turn off Wifi on Windows 8, you just need to enter the following command line into the Command Prompt. Open Command Prompt (Admin) Type the following command and press Enter:

netsh wlan stop hostednetwork

Cancel 1 hosted hosting

– Open Command Prompt (Admin) enter command line:

netsh wlan set hostednetwork mode=disallow ssid=NameFifi key=passWifi

In there: NameWiFi is the name Wifi emits, PassWifi is the password of the transmitted Wifi.

Note that, you can optionally change the wifi password at will in this Passwifi place and remember, wifi passwords are case sensitive. Press Enter to start wifi broadcasting on Windows 8.

Fix some errors that cannot play Wifi

1. Error The hosted network couldn’t be started

You press the key combination Windows+ CHEAP type in the word “devmgmt.msc” then press OK. A new window will appear Network adapters choose virtual wifi adapter right click and select Enable

2. The wifi tower with a red x can’t connect to the network

– Click on the Wifi network then select Properties.

– A new window will appear, switch to the item Security select item Security type choose Noitem Encryption type select None. Press OK then reconnect.

The latest operating system is Windows 10, just like Windows 8, users who do not need to use support software can also play wifi on Windows 10 with cmd commands in the system. Besides, the settings for wifi broadcasting on Windows 10 are almost the same as in Windows 8, only a little change in the interface of settings such as Command Prompt.

https://thuthuat.Emergenceingames.com/phat-wifi-tren-windows-8-khong-can-phan-mem-1874n.aspx
Above we have just guided you to play Wifi on Windows 8 from a laptop without using software, in general, wireless networks played this way are usually quite fast and stable, but you need to remember and write the correct command lines. Only then can you play wifi on Windows 8.